CNC machining service
1. Computer simulation system
With the development of computer technology and the constant enlargement of CNC Machining Service education, there are more and more NC machining simulation systems and their performance is improving day by day. Therefore, it can be used to start the inspection procedure and watch the tool movement to determine if there is a possibility of collision.
2. Using the simulation performance of CNC Machining Service center
Generally, the more advanced CNC machining centers have graphic performance. After inputting the program, it is advisable to call graphic simulation to show the performance and watch the moving path of the tool in detail, so as to check whether the tool may collide with the workpiece or fixture.
3. Using performance of CNC Machining Service center
Using the performance of CNC Machining Service center, we can check the accuracy of tool path. When the program is input into CNC machining center, it is advisable to install the tool or workpiece, and then press the idle operation button. At this time, the spindle does not rotate, and the worktable automatically operates according to the program track. At this time, it is advisable to find out whether the tool may collide with the workpiece or fixture. However, in this case, it must be ensured that when the workpiece is installed, the cutter cannot be installed; when the cutter is installed, the workpiece cannot be installed, otherwise there will be collision.
4. Locking performance of CNC machining center
Generally, CNC Machining Service centers have locking performance (full lock or single shaft lock). When the program is entered, the z-axis is locked and the collision can be inferred from the z-axis coordinate value. The use of this performance should avoid tool change and other operations, otherwise the program cannot pass.
5. Coordinate system and cutter compensation must be configured accurately
Do you want to buy CNC Machining Service? Contact us now,we provide high-quality CNC Machining Service.